Silverado Classic 1500 4WD V8-5.3L Hybrid (2007)
6. Install the 3-phase cable to the SGCM studs.
7. Install the 3-phase cable nuts.
Tighten the nuts to 15 N.m (11 lb ft).
8. Install the SGCM cover and bolts.
Tighten the bolts to 9 N.m (80 lb in).
9. Raise the vehicle.
10. Install the transmission jack.
11. Raise the transmission off the support.
12. Remove the transmission support bolts and support.
13. Lower the rear of the transmission.
14. Install the 3-phase cable to the stator studs.