Silverado Classic 1500 4WD V8-5.3L Hybrid (2007)
The flange of the J 46093 should locate into the hole in the flexplate. Use two M10 1.5 x 40 mm bolts for proper tool operation.
Tighten the bolts to 50 N.m (37 lb ft).
5. Remove the flexplate bolts.
6. Remove the flexplate.
Important: DO NOT use pry bars to remove the starter/generator rotor.
7. Insert 2 bolts into the holes in the starter/generator rotor.
8. Tighten the bolts in order to pull the rotor off.
9. Remove the starter/generator rotor.
Installation Procedure