Silverado Classic 1500 4WD V8-5.3L Hybrid (2007)
2. Install the power steering cooler outlet hose (2) to the power steering pump (1).
3. Install the retaining clamp.
4. Install the power steering inlet hose (3) to the power steering gear (1).
5. Install the retaining clamp.
6. Fill and bleed the power steering system.
7. Inspect all the hose connections for leaks.
8. Install the front grille.
9. Connect the energy storage box after servicing the vehicle. Refer to Hybrid Battery Service Disconnect/Connect (5.3L Engine w/RPO HP2).
Power Steering Gear Inlet and Outlet Hose Replacement
Power Steering Gear Inlet and Outlet Hose Replacement
Removal Procedure
1. Disconnect the energy storage box before serving the vehicle. Refer to Hybrid Battery Service Disconnect/Connect (5.3L Engine w/RPO HP2).
2. Notice:
Refer to Power Steering Hose Disconnected Notice.
Install a drain pan under the vehicle.
3. Remove the power steering gear inlet hose (4) from the brake booster.
4. Remove the power brake booster outlet hose (3) retaining clamp (2) to remove the power brake booster hose outlet hose from the brake booster.
5. Remove the power brake booster inlet hose (1) from the brake booster.