chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Engine Controls - MIL ON/Misfire/Misfire DTC's Set|Page 17348 > < Engine Controls - MIL ON/Misfire/Misfire DTC's Set|Page 17346
Page 1
background image

Ground Strap: Service and Repair

Engine Ground Strap Replacement

Removal Procedure

1.  If necessary, remove the engine sight shield.
2.  Remove the engine wiring harness ground bolt.
3.  Reposition the engine wiring harness ground and ground strap.

4.  Remove the ground strap nut from the stud at the front of dash.
5.  Remove the ground strap from the stud.

Installation Procedure

1.  Install the ground strap to the stud.

Notice:  Refer to Fastener Notice.

2.  Install the ground strap nut to the stud at the front of dash.

Tighten the nut to 9 N.m (80 lb in).

3.  Position the ground strap and engine wiring harness ground.
4.  Install the engine wiring harness ground bolt.

Engine Controls - MIL ON/Misfire/Misfire DTC's Set|Page 17348 > < Engine Controls - MIL ON/Misfire/Misfire DTC's Set|Page 17346