Silverado Classic 1500 4WD V8-5.3L Hybrid (2007)
Clockspring Assembly / Spiral Cable: Removal and Replacement
Inflatable Restraint Steering Wheel Module Coil Replacement (Coil)
Inflatable Restraint Steering Wheel Module Coil Replacement (Coil)
Removal Procedure
Caution: Refer to SIR Caution.
1. Disable the SIR system. Refer to SIR Disabling and Enabling. See: Air Bag(s) Arming and Disarming/Service and Repair
2. Remove the steering column trim covers.
3. Remove the wire harness assembly (4) from the wire harness strap (5).
4. Remove the 2 wire harness straps (3) from the wire harness assembly.
5. Remove the wire harness strap (2) from the upper tilt head assembly (1).
6. Remove the retaining ring (1).
7. Remove the SIR coil (2).
8. Remove the wave washer (3) from the steering column upper shaft.
Installation Procedure
1. Align the block tooth on the upper shaft to the 12 o'clock position (1).
Notice: Ensure all fasteners are securely seated before applying needed torque. Failure to do so may result in component damage or
malfunctioning of steering column.
