Silverado Classic 1500 4WD V8-5.3L Hybrid (2007)
6. Remove the bolts (1) securing the transmission range selector cable bracket (2) to the transmission.
7. Remove the transmission range selector cable bracket.
Installation Procedure
1. Install the transmission range selector cable bracket.
2. Notice:
Refer to Fastener Notice.
Install the transmission range selector cable bracket bolts (1).
Tighten the bolts to 25 Nm (18 ft. lbs.).
3. Align and install the cable to the bracket.
4. Install the retainer that secures the cable to the bracket.
5. Lower the vehicle.
6. Check the vehicle for proper operation. If cable adjustment is necessary, refer to Range Selector Lever Cable Adjustment.
