Silverado Classic 1500 4WD V8-5.3L Hybrid (2007)
Torque Converter Bearing/Bushing: Service and Repair
Torque Converter Locator Bushing Replacement (5.3L Engine w/RPO HP2)
Tools Required
^
J 8433-1 Puller Bar
^
J 45849 Pilot Bushing Remover
^
J 45949 Pilot Bearing and Flywheel Locator Installer
Removal Procedure
1. Remove the starter/generator rotor. Refer to Generator Rotor Replacement (5.3L Engine w/RPO HP2).
2. Install the J 45849 (1) into the locator bushing (2).
3. Using 2 wrenches, rotate the inner shaft of J 45849, in order to remove the bushing.
4. Remove the locator bushing.
Installation Procedure
