Silverado Classic 1500 4WD V8-5.3L Hybrid (2007)
10. Install the inner bearing.
11. Important:
The rubber outer sealing rings of the oil seal must be driven into the wheel hub first.
Install the new oil seal using the J 44420 (2) and the J 8092 (1).
12. Install the rotor, if necessary. Refer to Rear Brake Rotor Replacement.
13. Apply a light coat of high melting point EP bearing lubricant to the axle housing spindle.
14. Important:
If the wheel hub assembly does not fully seat itself onto the axle shaft spindle and is removed, the wheel hub seal must be replaced.
Install the wheel hub to the axle housing.
15. Install the adjusting nut to the hub using the J 2222-C.
