Silverado Classic 1500 4WD V8-5.3L Hybrid (2007)
Speed Sensor: Service and Repair
NVG 246-NP8 - Transfer Case
Transfer Case Front Output Shaft Speed Sensor Replacement
Transfer Case Front Output Shaft Speed Sensor Replacement
Removal Procedure
1. Remove the transfer case shield, if equipped. Refer to Transfer Case Shield Replacement.
2. Disconnect the front speed sensor electrical connector (5).
3. Remove the front speed sensor.
Installation Procedure
1. Notice:
Refer to Fastener Notice.
Install the front speed sensor.
Tighten the speed sensor to 15 Nm (11 ft. lbs.).
