Workshop Repair Manuals

Chevrolet Workshop Manuals

[PREV PAGE] [NEXT PAGE]

chevrolet Workshop Repair Guides


Silverado Classic 2500 2WD V8-6.0L (2007)

Transmission and Drivetrain > Actuators and Solenoids - Transmission and Drivetrain > Actuators and Solenoids - A/T > Clutch Control Solenoid Valve, A/T > Component Information > Service and Repair

Page 1
background image

Clutch Control Solenoid Valve: Service and Repair

Control and Shift Solenoids Replacement 

Removal Procedure

1. Remove the transmission filter. Refer to Automatic Transmission Fluid and Filter Replacement.

2. Important:  

Removal of the 1-2 accumulator is necessary only if servicing the pressure control solenoid.

Remove the 1-2 accumulator, if necessary. Refer to Accumulator Assembly, Spacer Plate, and Gaskets.

3. Disconnect the internal wiring harness electrical connectors from the following components:

^

Transmission fluid pressure switch (1)

^

1-2 shift control solenoid (2)

^

2-3 shift control solenoid (3)

^

Pressure control solenoid (4)

^

torque converter clutch pulse width modulation (TCC PWM) solenoid (5)

^

3-2 control solenoid (6)

4. Remove the pressure control solenoid retainer bolt (364A) and retainer (378).
5. Remove the pressure control solenoid (377).

Transmission and Drivetrain > Actuators and Solenoids - Transmission and Drivetrain > Actuators and Solenoids - A/T > Clutch Control Solenoid Valve, A/T > Component Information > Service and Repair

[PREV PAGE] [NEXT PAGE]