Silverado Classic 2500 2WD V8-8.1L (2007)
9. Remove the generator.
10. Remove the power steering pump.
11. Remove the generator bracket bolts and nut.
12. Remove the generator bracket stud.
13. Remove the generator bracket.
14. Remove the water crossover bolts.
15. Remove the water crossover.
16. Remove and discard the water crossover gaskets.
17. If replacing the water crossover remove the following:
1. Water outlet bolts (2)
2. Water outlet (1)
3. Thermostat (3)
Installation Procedure
