Silverado Classic 2500 2WD V8-8.1L (2007)
Water Pump: Service and Repair
Water Pump Replacement
Water Pump Replacement (8.1L)
Removal Procedure
1. Drain the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (w/RPO HP2) Draining
and Filling Cooling System (Vac-N-Fill).
2. Remove the drive belt.
3. Remove the fan clutch.
4. Reposition the outlet hose clamp at the water pump.
5. Remove the outlet hose from the water pump.
6. Reposition the bypass hose clamps at the water pump and water crossover.
7. Remove the bypass hose.
8. Remove the water pump bolts.
9. Remove the water pump.
10. Remove and discard the water pump gaskets.
Installation Procedure
