Silverado Classic 2500 4WD V8-6.6L DSL Turbo (2007)
Air Duct: Service and Repair
Air Distributor Duct Replacement
Air Distributor Duct Replacement
Removal Procedure
1. Remove the instrument panel (I/P) carrier.
2. Remove the air distribution duct retaining screws.
3. Remove the air distribution duct.
Installation Procedure
1. Install the air distribution duct.
2. Install the air distribution duct retaining screws.
Notice: Refer to Fastener Notice.
3. Tighten the screws.
Tighten the screws to 1.6 N.m (14 lb in).
4. Install the I/P carrier.