Silverado Classic 3500 4WD V8-6.6L DSL Turbo (2007)
Seat Latch: Service and Repair
Rear Seat Back Latch Replacement
Removal Procedure
1. Remove the rear seat from the vehicle. Refer to Rear Seat Replacement (60/40 Split) Rear Seat Replacement (Extended Cab) Rear Seat
Replacement (Extended Cab w/4th Door) .
2. Remove the armrest, if equipped. Refer to Rear Seat Armrest Replacement (60/40 Split) .
3. Remove the seat back cover. Refer to Rear Seat Back Cushion Cover and Pad Replacement .
4. Remove the bolts (1,2) that retain the latch assembly to the seat frame.
5. Unsnap the recliner cables from the folding mechanism.
6. Remove the seat back latch assembly from the seat frame.
Installation Procedure
1. Install the seat back latch assembly to the seat frame.
2. Attach the recliner cables to the folding mechanism.
Notice: Refer to Fastener Notice .
3. Install the bolts (1,2) that retain the latch assembly to the seat frame.
Tighten the bolts to 45 N.m (33 lb ft).
4. Install the seat back cover. Refer to Rear Seat Back Cushion Cover and Pad Replacement .
5. Install the armrest, if equipped. Refer to Rear Seat Armrest Replacement (60/40 Split) .
6. Install the rear seat to the vehicle. Refer to Rear Seat Replacement (60/40 Split) Rear Seat Replacement (Extended Cab) Rear Seat Replacement
(Extended Cab w/4th Door) .