Silverado Classic 3500 4WD V8-6.6L DSL Turbo (2007)
Coolant Outlet: Service and Repair
Water Outlet Tube Replacement (6.6L Engine)
Removal Procedure
1. Remove the intake manifold cover.
2. Drain the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (w/RPO HP2) Draining
and Filling Cooling System (Vac-N-Fill).
3. Remove the radiator inlet hose from the water outlet tube.
4. Open the clip and remove the wiring harness branch from the bracket.
5. Remove the bolt and wiring harness bracket at the thermostat housing.
6. Remove the main engine electrical harness connector bolts.