Silverado Classic 3500 4WD V8-6.6L DSL Turbo (2007)
25. Install the fuel line bracket to the stud.
26. Install the fuel line bracket nut.
Tighten the nut to 21 N.m (15 lb ft).
27. Connect the fuel feed and return line quick connect fittings.
28. Remove the tape from the turbocharger openings.
IMPORTANT: Lubricate the end of the duct prior to installation.
29. Install the charged air cooler inlet duct connector (4) to the turbocharger.
30. Tighten the charged air cooler inlet duct to turbocharger clamp (1).
Tighten the clamp to 6 N.m (53 lb in).