Silverado Classic 3500 4WD V8-6.6L DSL Turbo (2007)
NOTE: Ensure proper torquing of the fuel injector line. An under-torqued fuel injector line will not seal properly and an over-torqued fuel injector
line may damage the fuel injector fitting. An improperly sealed or damaged fuel injector line or fuel injector fitting will cause a fuel leak.
1. NOTE: Refer to Fastener Notice.
Install the fuel injector pipes.
Tighten the fittings to 41 N.m (30 lb ft).
2. Install the fuel rail pressure sensor.
3. Install the fuel filter.
4. Install a NEW quick connect fitting clip to the charged air cooler duct.
5. Install the charged air cooler outlet duct to the intake.
6. Install the air cleaner outlet duct.
7. Prime the fuel system. Refer to Fuel System Priming.
8. Start the engine. If the engine stalls, repeat the above step.
9. Once the engine starts, inspect for fuel leaks.
Fuel Rail Fuel Feed Pipe Replacement - Left
FUEL RAIL FUEL FEED PIPE REPLACEMENT - LEFT SIDE