Silverado Classic 3500 4WD V8-6.6L DSL Turbo (2007)
7. Connect the EGR valve motor harness connector.
8. Connect the intake air heater electrical connector.
9. Connect the MAP sensor electrical connector.
10. Install the engine harness clip to the air inlet tube.
11. Install the engine harness power lead (1) to the intake air heater stud.
12. Install the engine harness power lead nut (2) to the intake air heater stud.
Tighten the nut to 10 N.m (89 lb in).
13. Install the electrical harness bolts.
Tighten the bolts to 4 N.m (35 lb in).
14. Install the air cleaner assembly.
15. Install the air cleaner outlet duct.
