chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
A/C - HVAC Control Module Lockup During Reprogramming|Page 11144 > < A/C - HVAC Control Module Lockup During Reprogramming|Page 11142

Silverado Classic 3500 4WD V8-6.6L DSL Turbo (2007)

Page 3
background image

13. If necessary, remove the intake manifold tube.
14. If necessary, remove and discard the 2 O-ring seals from the tube.
15. Clean the gasket surfaces of the exhaust gas recirculation (EGR) cooler tube, intake manifold tube and inlet tube.

Installation Procedure

1. If necessary, install NEW O-ring seals onto the tube.
2. If necessary, install the intake manifold tube.

A/C - HVAC Control Module Lockup During Reprogramming|Page 11144 > < A/C - HVAC Control Module Lockup During Reprogramming|Page 11142