Silverado Classic 3500 4WD V8-6.6L DSL Turbo (2007)
Positive: Service and Repair
Battery Positive Cable Replacement
Battery Positive Cable Replacement (6.6L Engine)
Removal Procedure
Caution: Refer to Battery Disconnect Caution.
1. Disconnect the negative battery cable (2).
2. Unsnap the positive battery cable cap.
3. Disconnect the positive battery cable (1).
Important: The bolt is integral to the battery cable and is not removable.
4. Loosen the positive cable bolt at the underhood bussed electrical center (UBEC).
5. Unsnap the junction block cover.
6. Remove the positive cable (1) from the junction block.
7. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
