Silverado Classic 3500 4WD V8-6.6L DSL Turbo (2007)
12. Tighten the left exhaust pipe nuts.
Tighten the nuts to 50 Nm (37 ft. lbs.).
13. Install the transmission crossmember.
14. Install the transmission crossmember bolts/nuts.
Tighten the bolts/nuts to 95 Nm (70 ft. lbs.).
15. Install the transmission mount nut.
Tighten the nut to 50 Nm (37 ft. lbs.).
16. Remove the support from the transmission.
17. Lower the vehicle.
18. Install the transmission oil level indicator.
19. Lock the transmission oil level indicator.
Manual Shift Shaft Seal Replacement
Manual Shift Shaft Seal Replacement
Tools Required
^
J 43911 Selector Shaft Seal Remover
^
J 43909 Selector Shaft Seal Installer
Removal Procedure