Silverado Classic SS V8-6.0L (2007)
Rear Door Weatherstrip: Service and Repair
Side Door Opening Weatherstrip Replacement
Side Door Opening Weatherstrip Replacement
Removal Procedure
1. Open both doors.
2. Remove the sill plate. Refer to Front Side Door Sill Plate Replacement or Rear Side Door Sill Plate Replacement .
3. Remove the hinge pillar trim pillar. Refer to Body Hinge Pillar Trim Panel Replacement .
4. Remove the windshield pillar molding. Refer to Windshield Pillar Garnish Molding Replacement .
5. Remove the weather-strip from the rear side door pinch-weld flange.
Installation Procedure
1. Install the weather-strip from the rear side door opening fully seating the weather-strip into the pinch-weld flange.
2. Install the windshield pillar molding. Refer to Windshield Pillar Garnish Molding Replacement .
3. Install the hinge pillar trim pillar. Refer to Body Hinge Pillar Trim Panel Replacement .
4. Install the sill plate. Refer to Front Side Door Sill Plate Replacement or Rear Side Door Sill Plate Replacement .
5. Inspect the door closing effort and seal to door fit.