Sprint L3-61 1.0L (1988)
Brake Bleeding: Service and Repair
Hydraulic System Bleeding
NOTE: Perform bleeding operation starting with wheel cylinder farthest from master cylinder and then at front caliper of the same brake line. Do the
same on the other brake line.
Bleeding Sequence
2.
Fill master cylinder reservoir with brake fluid and keep at least one-half full of fluid during bleeding operation.
Attaching Bleeder Tube
2. Remove bleeder plug cap.
3. Attach a vinyl tube to the bleeder plug of wheel cylinder, and insert the other end into a container.
Depressing Brake Pedal/Bleeding Fluid
4. Depress brake pedal several times, and then while holding it depressed, loosen bleeder plug about one third to one-half turn.
