Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
4. Install the center console duct.
5. Install the screws to the center console duct.
Tighten the screws to 1.6 N.m (14 lb in).
6. Install the center console.
7. Install the floor air outlet duct extension (1) to the floor air duct (2).
Mode Actuator Replacement (Without RPO Code D07)
MODE ACTUATOR REPLACEMENT (WITHOUT RPO CODE D07)
REMOVAL PROCEDURE
1. Remove the floor air outlet duct extension (1) from the floor duct (2).
2. Disconnect the electrical connection at the mode actuator (10).
