Suburban 1/2 Ton 4WD V8-454 7.4L (1987)
Rear Door Panel: Service and Repair
Figure 24-Door Trim Panel Components
DOOR TRIM PANEL REPLACEMENT
Remove or disconnect
Tools Required:
J-9886-01 Door Handle Clip Remover
J-24595-B Door Trim Pad Clip Remover
1. Window regulator handle using J-9886-01.
2. Lock knob.
3. Arm rest to arm rest bracket screws (91).
4. Arm rest from the door.
5. Strap assembly covers (if equipped).
6. Strap assembly screws (if equipped).
7. Strap assembly (if equipped).
8. Door trim panel to door screws (93).
9. Door trim panel to door retainers using J-24595-B.
10. Door trim panel from the door.
-Pry the top of the panel away from the door side window seal clips.
Install or connect
-Check that all the trim retainers are securely fastened and are not damaged. Replace any damaged fasteners.
1. Door trim panel onto the door side window seal clips.
2. Door trim retainers into the door panel.
3. Door trim panel to door screws (93).
4. Strap assembly onto the door (if equipped).
5. Strap assembly screws (if equipped).
6. Strap assembly covers (if equipped).