Suburban 2WD V8-5.3L (2008)
Module/Service and Repair)Electronic Brake Control Module Replacement (With JL4) (See: Electronic Brake Control Module/Service and
Repair)Electronic Brake Control Module Replacement (J92) (See: Electronic Brake Control Module/Service and Repair) .
2. Position the BPMV (3) to the mounting bracket (1).
Notice: Refer to Fastener Notice .
3. Install the retaining nuts (2) to the BPMV (3).
Tighten to 9 N.m (80 lb in).
4. Position the BPMV and bracket assembly (13) to the frame.
5. Slide the BPMV assembly toward the rear of the vehicle.
6. Install the BPMV bracket bolts (12).
Tighten the bolts to 22 N.m (16 lb in).