Suburban 2WD V8-5.3L (2008)
12. Position the rear brake pipes (3) and (5) to the BPMV (6).
13. Install the rear brake pipe fittings (2) and (4).
Tighten the fittings to 18 N.m (13 lb ft).
14. Position the retaining clip (1) to the frame.
15. Connect the EBCM electrical connector.
16. Bleed the BPMV. Refer to Antilock Brake System Automated Bleed Procedure (Without JL4) (See: Brake Bleeding/Service and Repair)Antilock
Brake System Automated Bleed Procedure (With JL4) (See: Brake Bleeding/Service and Repair) .