Suburban 2WD V8-5.3L (2008)
1. Install a new brake booster gasket.
Important: An assistant may be necessary to hold the brake booster in place while installing the nuts.
2. Install the power vacuum brake booster to the vehicle.
Notice: Refer to Fastener Notice .
Important: Tighten the upper right brake booster nut first.
3. Install the brake booster nuts (1).
Tighten the nuts to 33 N.m (24 lb ft).
4. Connect the brake booster pushrod to the brake pedal pivot pin.
5. Install the stoplamp switch (1).