Suburban 2WD V8-5.3L (2008)
Lifter / Lash Adjuster: Service and Repair
Valve Lifter Oil Manifold Replacement
Valve Lifter Oil Manifold Replacement
Removal Procedure
1. Remove the intake manifold. Refer to Intake Manifold Replacement (RPOs LY2/LY6) (See: Intake Manifold/Service and Repair)Intake Manifold
Replacement (RPOs LC9/LMG/LY5/L76) (See: Intake Manifold/Service and Repair)Intake Manifold Replacement (RPO L92 - First Design) (
See: Intake Manifold/Service and Repair)Intake Manifold Replacement (RPO L92 - Second Design) (See: Intake Manifold/Service and Repair) .
2. Disconnect the engine harness electrical connector (1) from the oil pressure sensor.
3. DO NOT lift the valve lifter oil manifold by the electrical lead frame.