Suburban 2WD V8-5.3L (2008)
Tighten the bolt to 8 N.m (71 lb in).
5. Raise the vehicle.
6. Install the coolant heater cord clip (6) to the front brake front pipe.
7. Position the coolant heater cord clip to the frame and install the coolant heater cord retainer (5).
8. Connect the coolant heater cord electrical connector.
9. Position and install the oil pan skid plate and bolts, if equipped.
Tighten the bolts to 20 N.m (15 lb ft).
10. Lower the vehicle.