Suburban 2WD V8-5.3L (2008)
16. Connect the engine harness electrical connector (1) to the CMP sensor wire harness electrical connector.
17. Install a NEW crankshaft front oil seal. Refer to Crankshaft Front Oil Seal Replacement (RPOs LC9/LMG/LY2/LY5) (See: Seals and
Gaskets/Front Crankshaft Seal/Service and Repair)Crankshaft Front Oil Seal Replacement (RPOs LY6/L76/L92).
18. Install the water pump. Refer to Water Pump Replacement (RPOs LY2/LC9/LY5/LMG/LFA) (See: Water Pump/Service and Repair)Water Pump
Replacement (RPOs LY6/L76/L92) (See: Water Pump/Service and Repair) .