Suburban 2WD V8-5.3L (2008)
Evaporative Emissions Hose: Service and Repair
Evaporative Emission (EVAP) Hoses/Pipes Replacement - 2500 LWB - 98.4L (26 Gal) Tank-Front
Evaporative Emission System Hoses/Pipes Replacement (2500 LWB - 98.4L (26 gal) Tank-Front)
Removal Procedure
Important: Clean all fuel and evaporative emission (EVAP) line connections and surrounding areas prior to disconnecting the lines in order to
avoid possible fuel and/or EVAP system contamination.
1. Remove the fuel tank.
2. Remove the fuel tank shield retainers (1) and shield (2).
3. Remove the EVAP line from the fuel tank clip (1).
4. Open the fuel tank clips (2-7) and remove the fuel/EVAP lines from the clips.
5. Disconnect the fuel/EVAP line quick connect fittings from the fuel tank module.
