Suburban 2WD V8-5.3L (2008)
Fuel Return Line: Service and Repair
Fuel Hose/Pipes Replacement - Chassis (2500 Series)
Removal Procedure
Important: Clean all fuel and evaporative emission (EVAP) line connections and surrounding areas prior to disconnecting the lines in order to
avoid possible fuel and/or EVAP system contamination.
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (With CH 48027) Fuel Pressure Relief (Without CH 48027).
2. Disconnect the fuel feed pipe (2) quick connect fitting at the fuel rail.
3. Disconnect the EVAP line (1) quick connect fitting from the chassis line.
4. Cap the fuel rail and EVAP line in order to prevent fuel/EVAP system contamination.
5. Raise and support the vehicle. Refer to Vehicle Lifting.
6. Remove the fuel pipe bracket nut.
7. Remove the fuel pipe bracket from the bellhousing stud.
