chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Tires/Wheels - Rattle Noise from Wheel Or Hub Cap|Page 19826 > < Tires/Wheels - Rattle Noise from Wheel Or Hub Cap|Page 19824
Page 3
background image

10. Remove the spare tire hoist shaft guide from the bumper.

Installation Procedure

1. Install the spare tire hoist shaft guide to the bumper.

2. Install the hoist to the crossmember.

Notice:  Refer to Fastener Notice  .

3. Install the bolt.

Tighten the bolt to 40 N.m (30 lb ft).

4. Install the collar to the hoist
5. Install the shaft to the hoist.

Tires/Wheels - Rattle Noise from Wheel Or Hub Cap|Page 19826 > < Tires/Wheels - Rattle Noise from Wheel Or Hub Cap|Page 19824