Suburban 2WD V8-5.3L (2008)
3. Install the right differential carrier mounting nuts and washers.
Tighten the mounting nuts to 100N.m (75 lb ft).
4. Install the cooling lines to the transmission. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection (
See: ) .
5. Install the engine protection shield. Refer to Engine Shield Replacement .
6. Lower the vehicle.
7. Install the transmission fluid cooler hose to the radiator. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and
Connection (See: ) .
8. Install the transmission fluid cooler hose to the auxiliary oil cooler. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting
Disconnection and Connection (See: ) .
9. Install the front upper fascia support bracket. Refer to Front Upper Fascia Support Bracket Replacement .
10. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement (Escalade) Front Bumper Fascia Replacement (Tahoe) Front Bumper
Fascia Replacement (Avalanche) Front Bumper Fascia Replacement (Z71) Front Bumper Fascia Replacement (Yukon) .
Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
Removal Procedure
