Suburban 2WD V8-6.0L (2007)
1. Remove the air cleaner outlet duct.
2. If the vehicle is equipped with four wheel drive (4WD), remove the front drive axle. Refer to Differential Carrier Assembly Replacement.
3. If the vehicle is equipped with 4WD, remove the front drive axle bracket bolts and bracket.
4. Remove the exhaust manifold.
5. Remove the air conditioning (A/C) compressor bracket.
6. Remove the engine mount to frame bolts (1).
Important: DO NOT raise and/or support the engine by the crankshaft balancer or oil pan.
7. Place an adjustable (screw type) jack to the tab (1) located on the engine block.