Suburban 2WD V8-6.0L (2007)
8. Install the 2 lower shock absorber module mount bolts.
Tighten bolts to 50 N.m (37 lb ft).
9. Install the stabilizer shaft links to the lower control arm.
10. Install the tire and wheel.
11. Remove the safety stands.
12. Lower the vehicle.
13. Align the front end. Refer to Measuring Wheel Alignment.
Lower Control Arm Replacement (2500 Series)
Lower Control Arm Replacement (2500 Series)
Tools Required
^
J 43631 Ball Joint Separator
^
J 45851 Ball Joint Separator Protector Adapters
Removal Procedure
Important: The lower ball joint and control arm are serviced as an assembly and are not serviced separately.
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.