Suburban 2WD V8-6.0L (2007)
11. Install the cable to the steering column bracket.
12. Ensure the tangs fully engage into the steering column bracket.
13. Install the cable end to the steering column ball stud.
14. Install the retainer securing the cable to the steering column.
15. Position the carpet and insulation around the driver area.
16. Install the driver seat.
17. Install the instrument panel knee bolster.
18. Test the transmission for proper shift operation.
19. If all of the gear positions cannot be achieved, adjust the cable. Refer to Range Selector Lever Cable Adjustment.
Automatic Transmission Range Selector Lever Cable Bracket Replacement
Automatic Transmission Range Selector Lever Cable Bracket Replacement