Suburban 2WD V8-6.0L (2007)
Constant Velocity Joint Boot: Service and Repair
Wheel Drive Shaft Outer Joint and Seal Replacement
Wheel Drive Shaft Outer Joint and Seal Replacement
Tools Required
^
J 8059 Snap Ring Pliers
^
J 35910 Drive Axle Seal Clamp Pliers
^
J 36652-1 Drive Axle Clamp Swage Tool
^
J 36652-2 Axle Swage Tool
Removal Procedure
1. Remove the wheel drive shaft.
Important: Use caution when using the hand grinder by the CV joint outer race (1).
2. Use a hand grinder to cut through the swage ring (2).
3. Use side cutters to cut off the small boot clamp (4).