Suburban 3/4 Ton 4WD V8-393 6.5L DSL Turbo (1993)
Wiper Switch: Service and Repair
Multi-Function Lever (Switch) Removal and Replacement
Remove or Disconnect
1. Make sure the lever is in the center or "off" position.
2. Unsnap housing cover cap from steering column housing.
3. Cruise control wiring connector (A) from inside of connector (B) installed in column.
4. Pull the lever straight out of the turn signal switch.
Install or Connect
1. Make sure the lever is in center or "off" Position.
2. Push the lever into the turn signal switch.
3. Cruise control wiring connectors (A) and (B).
4. Snap housing cover cap (26) to steering column housing.
