Suburban 3/4 Ton 4WD V8-6.0L VIN U (2004)
1. Connect the electrical connectors, if necessary.
2. Align the retainers with the holes in the door.
3. Install the trim panel to the door by lowering the trim panel down into the retainer holes in order to seat the retainers.
4. Install the trim panel screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the trim panel screws to 2 N.m (18 lb in).
5. Install the manual lock lever by pressing the lever until the lever is completely seated.
6. Install the window-regulator handle, if necessary.
7. Install the door handle bezel.
