Suburban 3/4 Ton 4WD V8-6.0L VIN U (2004)
Brake Rotor/Disc: Service and Repair
Disc Brake Splash Shield Replacement - Front
Disc Brake Splash Shield Replacement - Front
Removal Procedure
Caution: Refer to Brake Dust in Service Precautions.
1. Raise and support the vehicle. Refer to Vehicle Lifting..
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
3. Remove the hub and bearing assembly. Refer to Wheel Hub, Bearing, and Seal Replacement (RWD) or Wheel Hub, Bearing, and Seal
Replacement (4WD) in Front Suspension.
4. Remove the splash shield (6) (15 Series).
5. Remove the splash shield (6) (25 Series).
Installation Procedure