Suburban 3/4 Ton 4WD V8-6.0L VIN U (2004)
4. Route the cable in through the floor pan and engage the grommet.
5. Remove the safety stands.
6. Lower the vehicle.
7. Roll the carpet into place.
8. Install the park brake pedal. Refer to Park Brake Pedal Assembly Replacement.
9. Adjust the park brake system. Refer to Park Brake Adjustment.
(Without RPO Nys)
Park Brake Cable Replacement - Left Rear (without RPO NYS)
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle. Refer to Vehicle Lifting..
3. Relieve the tension from the park brake cable by pulling down on the cable in front of the equalizer and removing the cable from the equalizer bar.