Suburban 3/4 Ton 4WD V8-6.0L VIN U (2004)
Notice: Refer to Fastener Notice in Service Precautions.
2. Using J41712 or equivalent, install the oil pressure sensor.
Tighten the oil pressure sensor to 20 Nm (15 ft. lbs.).
3. Connect the oil pressure sensor electrical connector (1).
4. If necessary, install the engine sight shield. Refer to Engine Sight Shield Replacement (4.8L, 5.3L, and 6.0L (RPO LQ4)) or Engine Sight Shield
Replacement (6.0L (RPO LQ9)).
