Suburban 3/4 Ton 4WD V8-6.0L VIN U (2004)
^
Tighten the rear axle fill plug to 33 Nm (24 ft. lbs.).
4. Lower the vehicle.
(9.75 Inch Axle)
Lubricant Replacement - Rear Drive Axle (9.75 Inch Axle)
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting in Service Precautions.
2. Remove the rear axle fill plug.
3. Remove the rear axle drain plug.
4. Drain the lubricant into a suitable container.
5. Inspect the drain plug for excessive metal particle accumulation. This accumulation is symptomatic of extreme wear.
6. Clean the drain plug.
Installation Procedure