Suburban 3/4 Ton 4WD V8-6.0L VIN U (2004)
10. Install the propeller shaft universal joint (2) to the pinion yoke (1).
Align the reference marks made during removal.
11. Install the yoke retainers (7) and the yoke retainer bolts (6) to the pinion yoke (1).
^
Tighten the yoke retainer bolts to 25 Nm (18 ft. lbs.).
12. Inspect the axle lubricant level, and add, if necessary. Refer to Lubricant Level Inspection -Front Drive Axle.
13. Install the differential carrier assembly shield, if equipped. Refer to Shield Replacement.
14. Install the brake calipers. Refer to Brake Caliper Replacement - Front in Disc Brakes.
15. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation.
16. Lower the vehicle.
