Suburban 3/4 Ton 4WD V8-6.0L VIN U (2004)
13. Repeat this process to remove all six of the balls.
14. Pivot the CV joint cage (4) and the inner race 90 degrees to the center line of the outer race (1). At the same time, align the cage windows (3) with
the lands of the outer race (2).
15. Lift out the cage (4) and the inner race.
16. Remove the inner race (1) from the cage (2) by rotating the inner race (1) upward.
17. Clean the following items thoroughly with cleaning solvent. Remove all traces of old grease and any contaminates.
17.1.
The inner and outer race assemblies
17.2.
The CV joint cage
17.3.
The chrome alloy balls
18. Dry all the parts.
19. Check the CV joint assembly for unusual wear, cracks, or other damage
20. Replace any damaged parts.
21. Clean the halfshaft bar. Use a wire brush to remove any rust in the seal mounting area (grooves).
Assembly Procedure
