Suburban 4WD V8-5.3L (2008)
9. Connect the brake master cylinder reservoir return hose quick connect (1).
10. Connect the brake master cylinder reservoir supply hose quick connect (2).
11. Connect the brake fluid level sensor electrical connector.
12. Fill the brake master cylinder reservoir. Refer to Master Cylinder Reservoir Filling (See: Procedures/Master Cylinder Reservoir Filling) .
13. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair)Hydraulic
Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair) .
Brake Master Cylinder Adapter Replacement
Brake Master Cylinder Adapter Replacement
Removal Procedure
1. Place the ignition switch in the OFF position.
2. Apply the park brake.