Tahoe 2WD V8-5.3L (2007)
Rear Vision Camera: Customer Interest
Instruments - Rear Vision Camera Inoperative
Bulletin No.: 06-08-127-002
Date: November 09, 2006
TECHNICAL
Subject:
UVC Rear Vision Camera System Inoperative (Inspect for Missing CPA Retainer and/or Properly Seated Connector/Connection at Camera)
Models:
2007 Cadillac Escalade, Escalade ESV, Escalade EXT
2007 Chevrolet Avalanche, Suburban, Tahoe
2007 GMC Yukon, Yukon XL, Yukon Denali, Yukon Denali XL
with Rear View Camera (RPO UVC)
Condition
Some customers may comment on a condition with the rear vision camera having a blank screen when shifting into reverse. You will also notice a
disclaimer at the top of the screen but the rest of the screen is black.
Cause
A connector position assurance (CPA) retainer may be missing from the connector at the camera connector.
Correction
Examine the connection at the rear view camera wiring harness connector. Inspect for bent / backed out pins or a missing CPA retainer in the rear view
camera connector. Repair or replace as necessary. Refer to Object Detection Connector End Views, Connector 9 Rearview Camera (UVC) in SI.
Inspect for a missing CPA retainer by performing the following steps:
Refer to Safety and Security - Object Detection - Rear Camera Replacement Liftgate or Endgate in SI.
Depending on the model of the vehicle, remove one of the following components:
Endgate Trim Panel
Rear Liftgate Applique