Tahoe 2WD V8-5.3L (2007)
Notice: Refer to Fastener Notice.
4. Position the park brake cable to the rear axle bracket and install the bolt and nut (2500 series).
Tighten the bolt and nut to 22 N.m (16 lb ft).
5. Position the park brake cable to the cable guides on the vehicle frame.
6. Install the cable to the mounting bracket until the tabs lock into place.
7. Connect the left rear park brake cable (3) to the intermediate park brake cable (1) equalizer.
8. Lower the vehicle. Refer to Lifting and Jacking the Vehicle.
9. Enable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Enabling.
10. Adjust the park brake. Refer to Park Brake Adjustment.
Parking Brake Rear Cable Replacement - Right Side
Parking Brake Rear Cable Replacement - Right Side
Removal Procedure
